Publications

PhD Thesis

  • Contribuţii la studiul motoarelor cu reluctanţă variabilă şi magneţi permanenţi autocomutate electronic”, conducător ştiinţific prof.dr.ing. BIRO Karoly-Agoston, 2001, Universitatea Tehnică din Cluj-Napoca.

Relevant Papers

  • F. Jurca, Claudia Martis: “Theoretical and experimental analysis of a three-phase permanent magnet claw-pole synchronous generator”, IET Electric Power Applications 2012, Vol. 6, Iss. 8, pp. 491–503. ieee, ISI, Scopus
  • Claudia Martis, C. Oprea, I.A. Viorel, J. Gyselinck: “Design of a Fault-Tolerant 6-phase Switched Reluctance Motor for Electric Power-Assisted Steering Systems”, IEEE International Conference in Electric Machines and Drives IEMDC 2009, Miami, USA, mai 2009, E-ISBN :  978-1-4244-4252-2, Print ISBN: 978-1-4244-4251-5. ieee, ISI, Scopus
  • F. Jurca, Claudia Martis, I. Birou, K. Biro: “Analysis of a claw-pole synchronous machine for wind power conversion module”, International conference on Electrical Machines, ICEM 2008, Vilamoura, Portugal 2008, on CD, E-ISBN :  978-1-4244-1736-0, Print ISBN: 978-1-4244-1735-3. ieee, ISI, Scopus
  • F. Jurca, Claudia Martis, K. Biro: Claw-pole generator analysis using flux 3D”, SPEEDAM 2008 – International Symposium on Power Electronics, Electrical Drives, Automation and Motion, art. no. 4581153, pp. 1286-1291, 2008, E-ISBN :  978-1-4244-1664-6, Print ISBN: 978-1-4244-1663-9. ieee, ISI, Scopus
  • C.Oprea, Claudia Martis: “Fault tolerant permanent magnet synchronous machine for electric power steering systems”, International Symposium on Power Electronics, Electrical Drives, Automation and Motion SPEEDAM 2008, pp. 256-261, 2008, E-ISBN:  978-1-4244-1664-6, Print ISBN: 978-1-4244-1663-9. ieee, ISI, Scopus
  • Claudia Marţiş, H.C. Hedeşiu, L. Szabó, B. Tătăranu, F. Jurca, C. Oprea: “Electrical Machines Virtual Laboratory: Grid Connection of a Synchronous Generator”, Proceedings of the 12th International Power Electronics and Motion Control Conference (EPE PEMC ‘2006), Portoroz (Slovenia), 2006. ieee, ISI, Scopus
  • H. Henao, Claudia Martis, G.A. Capolino: “An equivalent internal circuit of the induction machine for advanced spectral analysis”, IEEE Transactions on Industry Applications, vol. 40, no. 3, pp. 726-734, may-june 2004. ieee, ISI, Scopus
  • H. Henao, Claudia Martis ,  G.A. Capolino: “On the stray flux analysis for the detection of  the three-phase induction machine faults”, Procedings of the 38th Annual IAS Meeting, October 2003, Salt Lake City, Utah USA, pp., 2003. ieee, ISI, Scopus 

Textbooks

  • Claudia Marțiș, Hedesiu H., Jurca F., Oprea C., Ruba M. – “Introducere in SistemeElectromecanice”, Editura Alma Mater, 2012, ISBN 978-606-504-136-3
  • Claudia Martis, Hedesiu, H. – “Sisteme Electromecanice” Editura Mediamira Cluj-Napoca, 2007, ISBN 978-973-713-168-3.
  • Hedesiu H, Folea S, Claudia Marţiş – “Proiectarea grafică a sistemelor SCADA”, Editura Mediamira, Cluj-Napoca, 2007, ISBN 978-973-713-167-6
  • Claudia Marţiş – „Compatibilitate Electromagnetică în Sisteme Electromecanică”, Editura Mediamira, Cluj-Napoca 2004, ISBN 973-713-032-2.

Scientific papers

 

  1. Fabien Chauvicourt, Cassio Faria, Arkadiusz Dziechciarz, Claudia Martis: “Infuence of Rotor Geometry on NVH Behavior of Synchronous Reluctance Machine”, 2015 Tenth International Conference on Ecological Vehicles and Renewable Energies (EVER).
  2. Arkadiusz Dziechciarz, Claudia Martis: “New Shape of Rotor Flux Barriers in Synchronous Reluctance Machines Based on Zhukovski Curves”, The 9th International Symposium on ADVANCED TOPICS IN ELECTRICAL ENGINEERING (ATEE), 7-9 May 2015 Bucharest
  3. C. Oprea, A. Dziechciarz, C. Martis, Comparative analysis of different synchronous reluctance motor topologies, in Environment and Electrical Engineering (EEEIC), 2015 IEEE 15th International Conference on , vol., no., pp.1904-1909, 10-13 June 2015.
  4. C.  Oprea, C. Martis, C. Irimia, C.Husar, M. Grovu, „Electromagnetic and Structural Analysis of a Variable Reluctance Synchronous Machine”, ACEMP-OPTIM-ELECTROMOTION 2015 Joint Conference
  5. D. C. Popa, B. Varaticeanu, D. Fodorean, P. Minciunescu, C. Martis, High Speed Induction Motor used in an Electric Vehicle, presented at EV 2015 conference and 65th anniversary of ICPE and under publication in Electrotehnică, Electronică, Automatică under publication in Electrotehnică, Electronică, Automatică.
  6. T. Rusu, A.C.Pop, L. Szabo, C. Martis, Study of winding arrangement and material quality effects on the core losses in high speed switched reluctance machines, in Engineering of Modern Electric Systems (EMES), 2015 13th International Conference on , vol., no., pp.1-4, 11-12 June 2015
  7. P. D. Teodosescu, A.-C. Pop, T. Rusu, C. S. Martis, I. Vintiloiu “Considering Half Bridge Converters for Switched Reluctance Motor Drive Applications”, ACEMP OPTIM ELECTROMOTION Joint Conference, 2-4 September 2015, Turkey.
  8. D. Fodorean, A. Popp, O. Birte, C. Martis, M. Sarrazin, H. van der Auweraer, Noise and vibration behavior and analysis conditions of a 45kW induction motor, EEEIC, Rome, Italy, 10-13 June, 2015, pp. 2147-2152, ISBN: 978-1-4799-7992-9.
  9. A.Popp, M.Sarrazin, H. Van Der Auweraer, D. Fodorean, O. Birte, Karoly, B., Martis, C., Real-time co-simulation platform for electromechanical vehicle applications, 9th Int. Symposium on Advanced Topics in Electrical Engineering, 7-9 May 2015, pp.240-243, Bucharest, Romania, DOI:10.1109/ATEE.2015.7133772.
  10. O. Bîrte, L. Szabó, H.Van der Auweraer, C. Faria, Á.Popp, C. Marţiş, Study of Torque Ripple and Noise for Different Rotor Topologies of a Synchronous Reluctance Machine, Advanced Topics in Electrical Engineering, Bucharest, May. 2015.
  11. S. Ciceo, Y. Mollet, M. Sarrazin, H.van der Auweraer, C. Marțiș, Model-Based Design and Testing for Electric Vehicle Energy Consumption Analysis, presented at EV 2015 conference and 65th anniversary of ICPE and under publication in Electrotehnică, Electronică, Automatică.
  12. F.N. Jurca, M. Ruba, Claudia Martis, R. Martis. F. Pop-Piglesan: “Synchronous Reluctance Motors for Small Electric Traction Vehicle”, EPE Iasi 2014. ieee, Scopus
  13. M. Ruba, F. Jurca, Claudia Martis, R. Martis, F. Pop Piglesan: “Analysis of Maximum Torque per Ampere Control Strategy for Variable Reluctance Synchronous Machines for Traction Applications”,  EPE Iasi 2014.ieee, Scopus
  14. D. Fodorean, M. Sarrazin, Claudia Steluța Marțiș, J. Anthonis, H. Van der Auweraer: “Characterizing the Motorization of a Light Electric Vehicle through FEM and NVH tests”, ICEM 2014, Berlin.ieee,Scopus
  15. M. Sarrazin, J. Anthonis, H. Van der Auweraer, Claudia Martis, J. Gyselinck: “Signature Analysis of Switched Reluctance and Permanent Magnet Electric Vehicle Drives”, ICEM 2014, Berlin.ieee, Scopus
  16. M. Sarrazin, D. Fodorean, S. Gillijns, B. Peeters, H. Van der Auweraer, Claudia Martis: “Multiphysical analysis of a three-phase PWM-supplied PMSM for light vehicle applications”, ISMA, 2014, Leuven.Scopus
  17. D. Fodorean, O. Birte, A. Popp, S. Gillijns, J. Anthonis, H. Van Der Auweraer, Claudia Martis: “Structural analysis of PMSM-radial flux, PMSM-axial flux and SRM used to propel a special electric scooter”, ISMA 2014, Leuven. Scopus
  18. Claudia Martis, D. Fodorean, P.C.Irimia, C. Husar: “Vibroacoustic Behaviour Analysis of a Permanent Magnet Synchronous Machine for Automotive Applications”, UPEC 2014, Cluj-Napoca.ieee, Scopus
  19. F.N. Jurca, Claudia Marţiş: “Optimal Design of a Flux-Switching Permanent Magnet Machine for Small Power Automotive Applications”, SPEEDAM 2014.ieee, Scopus,ISI
  20. A.C. Pop, T. Rusu, M. Koch, I. Vintiloiu, Claudia Martis: “Magnet-based vs. magnet-free electrical machines for low power automotive applications”, ICEM 2014, Berlin. ieee, Scopus
  21. F. Pop-Piglesan, F. Jurca, C. Oprea, C. Martis: “Permanent magnet synchronous machine design for low-noise drive systems“, ISMA 2014, Leuven.Scopus
  22. J Gyselinck, Claudia Martis, R Sabariego: „Using dedicated time-domain basis functions for the simulation of pulse-width-modulation controlled devices–Application to the steady-state regime of a buck converter”, Electromotion 2013. 1_Google
  23. Claudia Martis, D Fodorean, A Popp, Johan Gyselinck: “Coupled Electromagnetic-structural Analysis of a Permanent Magnet Synchronous Machine”, 10th Jubilee International Symposium on Advanced Electromechanical Motion Systems, Electromotion, 1_Google
  24. T. Rusu, O. Birte, L. Szabo, Claudia Martis: “Script Controlled Modeling of Low Noise Permanent Magnet Synchronous Machines by using JMAG Designer”, Journal of Computer Science and Control Systems – Vol. 6, Nr. 1, 2013. EBSCO
  25. A.T. Filip, R.P. Hangiu, Claudia Martis, K.A. Biro: “Analytical Model for Predicting Displacements in Permanent Magnet Synchronous Machine”, The 8th International Symposium on Advanced Topics in Electrical Engineering, May 23-25, 2013.ieee
  26. A.T. Filip, R.P. Hangiu, Claudia Martis, K.A. Biro: “Radial Force and Modal Shapes Calculation in Permanent Magnet Synchronous Machines”, Journal of Computer Science and Control Systems – Vol. 6, Nr. 1, 2013. EBSCO
  27. O. Birte, T. Rusu, L. Szabo, Claudia Martis: “Script Controlled Model of a Synchronous Reluctance Machine for Rapid Design Optimization”, Journal of Computer Science and Control Systems – Vol. 6, Nr. 1, 2013. EBSCO
  28. R.P. Hangiu, A.T. Filip, Claudia Martis, K.A. Biro: “Analysis of the Operating Modes of an Integrated Starter Alternator for Automotive Applications”, Journal of Computer Science and Control Systems – Vol. 6, Nr. 1, 2013. EBSCO
  29. R.P. Hangiu, A.T. Filip, Claudia Martis, K.A. Biro: “Permanent magnet synchronous machines for integrated starter alternator Applications”, Miskolc – XXVII. microCAD International Scientific Conference, 2013.
    1. F. Nicolae Jurca, R.P. Hangiu, C. Martis: “Design and Performance Analysis of an Integrated Starter-Alternator for Hybrid Electric Vehicles”, Advanced Engineering Forum (Volumes 8 – 9), pg. 453-460, 2013, Scientific.net, ISI
  30. C Oprea, L Szabo, C Martis: “Multi-Phase Linear Generator for Electric Vehicle Applications”, Advanced Engineering Forum (Volumes 8 – 9), pg. 461-468, 2013,  Scientific.net, ISI
  31. R.P. Hangiu, Claudia Martis, L. Szabo, K.A. Biro: “A Review of Automotive Integrated Starter Alternators”, Targoviste – Scientific Bulletin of the Electrical Engineering Faculty – Year 12 No. 2.
  32. R.P. Hangiu, A.T. Filip, Claudia Martis, K.A. Biro: “Performance assessment of an integrated starter alternator for  hybrid electric vehicles“, International Conference and Exposition on Electrical and Power Engineering (EPE), Page(s): 70 – 75 Print ISBN: 978-1-4673-1173-1, 2012. ISI, 2_Google
  33. F. Jurca, Claudia Martis: “Theoretical and experimental analysis of a three-phase permanent magnet claw-pole synchronous generator”, IET Electric Power Applications 2012, Vol. 6, Iss. 8, pp. 491–503. ieee, ISI, Scopus, 5_Google, 5_Scopus, 6_ISI
  34. A.M.Gazdac, A.Mpanda Mabwe, Claudia Martis, F.Betin, K.Biro: “ Investigation on the Thermal Behavior of the dual-rotor Permanent Magnet Induction Machine”, 38th Annual Conference on IEEE Industrial Electronics Society (IECON 2012)  Book Series: IEEE Industrial Electronics Society  Pages: 1858-1863, 2012.ISI, ieee
  35. A.M.Gazdac, A.Mpanda Mabwe, Claudia Martis, F.Betin, K.Biro: “ Analytical design algorithm and FEM analysis of the dual-rotor Permanent Magnet Induction Machine”, ICEM 2012, 1183-ff-002194.pdf, IEEE Catalog Number: CFP1290B-USB, ISBN: 978-1-4673-0141-1. ieee, Scopus. 2_Google
  36. A.M. Gazdac, Claudia Martis, A.Mpanda Mabwe, K. Biro: “Analysis of the material influence on the performance of the dual-rotor permanent magnet induction machine”,  13th International Conference on Optimization of Electrical and Electronic Equipment (OPTIM 2012), RF-002372, IEEE Catalog Number: CFP1222D-PRT, ISBN: 978-1-4673-1650-7. ieee, Scopus.
  37. A.M. Gazdac, A.M. Mabwe, F. Betin, Claudia Martis, K. Biro: ”Investigation on the thermal behavior of the dual-rotor Permanent Magnet Induction Machine”, IECON Proceedings, 2012, Article number 6388918, pg. 1858-1863. ieee, Scopus.
  38. C. Oprea, L. Szabó, Claudia Martis: “Linear Permanent Magnet electric generator for free piston engine applications”, ICEM 2012, 0689-ff-007706.pdf, IEEE Catalog Number: CFP1290B-USB, ISBN: 978-1-4673-0141-1. ieee, Scopus.
  39. F. Surdu, K. Biro, Claudia Martis, R. Trifa: “ Theoretical analysis of the reversed claw poles alternator performances”, ICEM 2012, 1473-ff-002798.pdf, IEEE Catalog Number: CFP1290B-USB, ISBN: 978-1-4673-0141-1. ieee, Scopus.
  40. F. Surdu, K. Biro, Claudia Martis: “Study on the behavior of a vehicle charging system with reverse claw-pole generator”, 13th International Conference on Optimization of Electrical and Electronic Equipment (OPTIM 2012), RF-001368, IEEE Catalog Number: CFP1222D-PRT, ISBN: 978-1-4673-1650-7.ieee, Scopus.
  41. R.P. Hangiu, A.T. Filip, Claudia Martis, K.A. Biro: “Performance assessment of an integrated starter alternator for hybrid electric vehicles“, International Conference and Exposition on Electrical and Power Engineering (EPE), Page(s): 70 – 75 Print ISBN: 978-1-4673-1173-1, 2012. ieee,  ISI
  42. R.P. Hangiu, A.T. Filip, Claudia Martis, K.A. Biro: “System-level Modeling and Simulation of a Permanent Magnet Synchronous Motor for an Integrated Starter Alternator“, Journal of Electrical and Electronics Engineering ISSN/EISSN: 18446035 20672128 Year: 2012 Volume: 5 Issue: 2 Pages: 67-70, Publisher: Editura Universităţii din Oradea.EBSCO
  43. R.P. Hangiu, A.T. Filip, Claudia Martis, K.A. Biro: “A Z-Source Inverter for an Integrated Starter Alternator”, Journal of Computer Science and Control Systems, pg. 15-18, 2012 volume:5 issue:2, ISSN/EISSN: 18446043 20672101. DOAJ, EBSCO
  44. F. Surdu, K. Biro, Claudia Martis: “Magneto-Thermal Analysis of Reversed Claw-Poles Machine”, Journal of Electrical & Electronics Engineering; May2012, Vol. 5 Issue 1, p241. AJD,Scopus
  45. E. Padurariu, K. Hameyer, L. Somesan, I. A Viorel, Claudia Martis: “ A simple analytical model of a permanent magnet transverse flux motor with a particular disk rotor”,  13th International Conference on Optimization of Electrical and Electronic Equipment (OPTIM 2012), RF-002984, IEEE Catalog Number: CFP1222D-PRT, ISBN: 978-1-4673-1650-7. ieee, Scopus. 1_Google,
  46. L. Somesan, K. Hameyer, E. Padurariu, I. A. Viorel, Claudia Martis: “ Sizing-designing procedure of the permanent magnet flux-switching machine based on a simplified analytical model”,  13th International Conference on Optimization of Electrical and Electronic Equipment (OPTIM 2012), RF-002976, IEEE Catalog Number: CFP1222D-PRT, ISBN: 978-1-4673-1650-7. ieee, Scopus. 2_Google, 3_Scopus
  47. A.C. Pop, V. Petrus, Claudia Martis, V. Iancu, J. Gyselinck: “ Comparative study of different torque sharing functions for losses minimization in switched reluctance motors used in electric vehicles propulsion”, 13th International Conference on Optimization of Electrical and Electronic Equipment (OPTIM 2012), RF-002852, IEEE Catalog Number: CFP1222D-PRT, ISBN: 978-1-4673-1650-7.ieee, Scopus, 5_Google
  48. A.C. Pop, V. Petrus, J. Gyselinck, Claudia Martis, V. Iancu: “Finite Element Based Multiphysics Optimal Design of Switched Reluctance Motors Used in Electric Vehicles Propulsion”, Journal of Computer Science and Control Systems, Vol. 5, Issue 1, ISSN 1844-6043, 2012. EBSCO, 1_Google
  49. V. Petrus, A.C. Pop, J. Gyselinck, Claudia Martis, V. Iancu: “ Average torque control of an 8/6 Switched Reluctance Machine for Electric Vehicle Traction”, Journal of Computer Science and Control Systems, Vol. 5, Issue 1, ISSN 1844-6043, 2012. EBSCO
  50. V. Petrus, A. C. Pop, Claudia Martis, V. Iancu, J. Gyselinck: “Direct instantaneous torque control of SRMs versus current profiling – comparison regarding torque ripple and copper losses”, 13th International Conference on Optimization of Electrical and Electronic Equipment (OPTIM 2012), RF-002771,  IEEE Catalog Number: CFP1222D-PRT, ISBN: 978-1-4673-1650-7. ieee, Scopus
  51. R.Trifa, Claudia Martiş, K. Biro: “Design and Analysis of a Permanent Synchronous Machine for Automotive Electromechanical Braking System“, ISEF 2011, Electrical Review, ISSN 0033-2097, R. 88 NR 7b/2012.
  52. R.Trifa, Claudia Martiş, K. Biro: “Design and Analysis of a Permanent Synchronous Machine for Automotive Electromechanical Braking System“, PRZEGLĄD ELEKTROTECHNICZNY (Electrical Review) Vol 2012, No 7b. ISI, Scopus
  53. F. Jurca, Claudia Martis, D. Fodorean: “Analysis of a radial flux synchronous machine with outer rotor for integrated starter-alternator”, SPEEDAM 2012, ISBN: 978-1-4673-1299-8. ieee, Scopus
  54. Pantea, G.  Aroquiadassou G., A. Mabwe, Claudia  Martis: “Real-time sensorless vector control for induction machines using an FPGA board”, SPEEDAM 2012, ISBN: 978-1-4673-1299-8. ieee, Scopus 1_Google, 2_Scopus
  55. A.Matyas, Claudia Martis, G. Aroquidassou, A. Mpanda and K. Biro: “Comparative Analysis and Design of Two Six-Phase Electrical Machines for Electrical Power Assisted Steering Systems”, COMPUTER FIELD MODELS OF ELECTROMAGNETIC DEVICES, Studies in Applied Electromagnetics and Mechanics, Volume 34, IOS Press, ISSN 1383-7281 (print), ISSN 1879-8322 (online), pp. 487 – 493, 2011. iospress, Scopus
  56. A.M. Gazdac, Claudia Martis, A. Mpanda, K. Biro, G. Aroquiadassou, R. Trifa: “Theoretical Study and Comparative Analysis of a Permanent Magnet Induction Machine”, Proceedings of International Conference ISEF 2011, on CD, 2011.
  57. AM Gazdac, CS Martis, KA Biro, RA Trifa: “Permanent Magnet Induction Machine- An Overview“, Journal of Computer Science and Control Systems ISSN/EISSN: 18446043 20672101 Year: 2011 Volume: 4 Issue: 1 Pages: 43-46. 3_Google
  58. R.Trifa, Claudia Martis , K. Biro , A.M. Gazdac: “Design and Analysis of a Permanent Magnet Synchronous Machine for Automotive Electromechanical Braking System”, Proceedings of International Conference ISEF 2011, on CD, 2011.
  59. R. Trifa, K. Biro, Claudia Martis, F. Surdu: “Modeling and Simulation of a PMSM for Brake-by-Wire Technology in Automotive applications”, 25th European Conference on Modelling and Simulation, Cracow, 2011. scs-europenet, Scopus
  60. A.C. Pop, V. Petrus, Claudia Martis, V. Iancu, J. Gyselinck: “Wide-Speed Range Control Strategy for a 8/6 Switched Reluctance Machine”, Joint ACEMP and Electromotion Conference, Istanbul, 2011.ieee 2_Google
  61. V. Petrus, A. C. Pop, C. S. Martis, V. Iancu, J. Gyselinck: “Direct Torque Control of a 4-Phase Switched Reluctance Machine”, Joint ACEMP and Electromotion Conference, Istanbul, 2011. ieee 2_Google
  62. A.C. Pop, V. Petrus, Claudia Martis, J. Gyselinck: “Parameter Identification and 2D FE Modeling of Existing Switched Reluctance Motors”, International Conference EVER 2011, Monaco, 2011.
  63. F. Surdu, K. Biro, Claudia Martis, R. Trifa: “Stator Geometry Influence on The Machine Magnetic Field Distribution for Claw-Pole Generators”, International Conference on Clean Electrical Power (ICCEP), 2011, pg. 345-349, E-ISBN :  978-1-4244-8928-2, Print ISBN: 978-1-4244-8929-9. ieee, Scopus
  64. F. Jurca, Claudia Martis: “Claw-Pole Machine Design and Tests for Small Scale Direct Driven Applications”, International Conference on Clean Electrical Power (ICCEP), 2011, pg. 237-242, E-ISBN :  978-1-4244-8928-2, Print ISBN: 978-1-4244-8929-9. ieee, Scopus 1_Google
  65. C. Oprea, Claudia Martis, F. Jurca, D. Fodorean, L. Szabo: “Permanent magnet linear generator for renewable energy applications: Tubular vs. four-sided structures”, International Conference on Clean Electrical Power (ICCEP), 2011, ISBN: 978-1-4244-8929-9, Page(s): 588 – 592. ieee, Scopus 5_Google
  66. A.C. Pop, V. Petrus, Claudia Martis, V. Iancu, J. Gyselinck: “On the firing angles control of 8/6 Switched Reluctance Machine”, Journal of Electrical and Electronics Engineering, Vol. 4, Issue 1, ISSN 18446035, 2011. Scopus 1_Google
  67. V. Petrus, A.C. Pop, Claudia Martis, V. Iancu, J. Gyselinck: ”Comparative study of different current control techniques for a 4-phase 8/6 switched reluctance machine”, Journal of Electrical and Electronics Engineering, Volume 4, Issue 1, 2011, Pages 173-178. Scopus
  68. R. Trifa, Claudia Martis, K. Biro, F. Surdu: “Design Optimization of a Permanent Magnet in a Synchronous Motor for Brake-By-Wire Technology in Automotives”, Journal of Electrical and Electronics Engineering, Vol. 4, Issue 1, ISSN 18446035, 2011. Scopus
  69. L.E. Somesan, E. Padurariu, I.A. Viorel, Claudia Martis, O. Cornea: “Simple Analytical Models of the Switched Reluctance Motors, Case Study”, International Conference on Electrical Machines (ICEM), 2010 XIX, on the CD, 978-1-4244-4174-7. ieee, Scopus Scopus_5, ISI_2, Google_2
  70. A.Matyas, G. Aroquiadassou, A. Mpanda-Mabwe, Claudia Martis, K. Biro: “Torque ripple analysis of a 42V fault tolerant six-phase permanent magnet synchronous machine”, IECON 2010 – 36th Annual Conference on IEEE Industrial Electronics Society, on the CD, ISBN: 978-1-4244-5225-5. ieee, ISI, Scopus, Scopus_1, ISI_1, Google_1
  71. A.Matyas, Claudia Martis, K. Biro: “Analysis of two six-phase electrical machines for electrical power assisted steering systems”, Proceedings of the International Scientific Conference MicroCAD ‘2010, Miskolc (Ungaria), Section K (Electrotehnics and Electronics), 2010, ISBN: 978-963-661-915-2.
  72. A.C. Pop, V. Petrus, Claudia Martis, V.  Iancu: “Electrical machines for hybrid/electrical vehicle – state of the art”, Proceedings of the International Scientific Conference MicroCAD ‘2010, Miskolc (Ungaria), Section K (Electrotehnics and Electronics), 2010, ISBN: 978-963-661-915-2.
  73. V. Petrus, A. C. Pop, Claudia Martis, V. Iancu: “A 5-phase SRM for Electric Vehicle Propulsion”, Journal of Computer Science and Control Systems, Vol 3. Nr. 1 2010, ISSN 1844-6043, pp.177-183. EBSCO
  74. F. Surdu, F. Jurca, Claudia Martis, K. Biro, R. Trifa: “Design and analysis of reverse claw pole alternator”, Journal of Computer Science and Control Systems, Vol 3. Nr. 1 2010, ISSN 1844-6043, pp. 225-231. EBSCO, 2_Google
  75. R. Trifa, Claudia Martis, K.  Biro, F. Surdu: “PMSM Design for brake by wire technology in automotives”, Journal of Computer Science and Control Systems, Vol 3. Nr. 1 2010, ISSN 1844-6043, pp. 237-241. EBSCO
  76. F. Jurca, Claudia Marţiş, K. Biro, C. A. Oprea: “Design and Development of a Three-Phase Permanent Magnet Claw Pole Synchronous Generator”, International Conference on Electrical Machines (ICEM), 2010 XIX, on the CD, 978-1-4244-4174-7.  ieee, Scopus
  77. C. Oprea, Claudia Martis, K. Biro, F. Jurca: “Design and Testing of a Four-sided Permanent Magnet Linear Generator Prototype”, International Conference on Electrical Machines (ICEM), 2010 XIX, on the CD, 978-1-4244-4174-7. ieee, ISI 7_Google, 2_ISI
  78. L. Strete, L. Tutelea, I. Boldea, Claudia Martis, I.A. Viorel: “Optimal Design of a Rotating Transverse Flux Motor (TFM) with Permanent Magnets in Rotor”, International Conference on Electrical Machines (ICEM), 2010 XIX, on the CD, 978-1-4244-4174-7. ieee, Scopus  4_Google
  79. V. Petrus, A. C. Pop, Claudia Martis, J. Gyselinck, V. Iancu: “Design and comparison of different Switched Reluctance Machine topologies for electric vehicle propulsion”, International Conference on Electrical Machines (ICEM), 2010 XIX, on the CD, 978-1-4244-4174-7. ieee, Scopus 6_Google
  80. A.Matyas, G. Aroquiadassou, Claudia Martis, A. Mpanda-Mabwe, K. Biro: “Design of six-phase synchronous and induction machines for EPS”, International Conference on Electrical Machines (ICEM), 2010 XIX, on the CD, 978-1-4244-4174-7.  ieee, Scopus 2_Google
  81. E. Padurariu, L. Somesan, I.A. Viorel, Claudia Martis, O. Cornea: “Switched Reluctance Motor Analytical Models, Comparative Analysis”, 12th International Conference on Optimization of Electrical and Electronic Equipment (OPTIM), 2010, Brasov, Romania, on CD , RD-000868, ISSN: 1842-0133, Print ISBN: 978-1-4244-7019-8. ieee, ISI, Scopus 5_Scopus, 2_ISI
  82. F. Jurca, I.A. Viorel, Claudia Martis,  K. Biro: “Steady State Behavior of a Permanent Magnet Claw Pole Generator”, 12th International Conference on Optimization of Electrical and Electronic Equipment (OPTIM), 2010, Brasov, Romania, Brasov, Romania, on CD RD-000876, ISSN: 1842-0133, Print ISBN: 978-1-4244-7019-8. ISI
  83. C.Oprea, Claudia Martis, K. Biro: “Analysis of the Pole Width Influence on a Four-Sided Linear Generator Performances”, Optim 2010, Brasov, Romania, on CD RD-003794. ISI
  84. Claudia Martis, V. Petrus, A.C. Pop, J. Gyselinck: “Design and Comparison of Different Switched Reluctance Machines Topologies for Automotive Applications”, The 10th International Conference on Development and Application Systems DAS 2010, ISSN: 1844-5020.
  85. F. Jurca, Claudia Martis,  K. Biro: “Claw-Pole Generators in Small Wind Power”, International Conference and Exhibition on Power Electronics Intelligent Motion Power Quality, PCIM 2009, Nuremberg, Germany, iunie 2009.
  86. F. Jurca, C. Martis, K. Biro: “Comparative analysis of the claw-pole rotor dimension influence on the performances of a claw-pole generator for wind application” International Conference on Clean Electrical Power, ICCEP, Capri, 2009, pp 715-720, E-ISBN :  978-1-4244-2544-0, Print ISBN: 978-1-4244-2543-3. ieee,  ISI, Scopus 2_Google
  87. F. Jurca, C. Martis, K. Biro: “Claw-pole synchronous generator optimization topology” International Symposium on Electromagnetic Fields (ISEF), Arras 2009, pe CD, ISBN 978-2-84832-115-8.
  88. Claudia Martis, C. Oprea, J. Gyselinck: “Design and analysis of a switched reluctance machine for electric power-assisted steering systems”, International Scientific Conference, MicroCAD 2009, Miskolc, Hungary, 2009.
  89. Claudia Martis, C. Oprea, I.A. Viorel, J. Gyselinck: “Design of a Fault-Tolerant 6-phase Switched Reluctance Motor for Electric Power-Assisted Steering Systems”, IEEE International Conference in Electric Machines and Drives IEMDC 2009, Miami, USA, mai 2009, E-ISBN :  978-1-4244-4252-2, Print ISBN: 978-1-4244-4251-5. ieee, ISI, Scopus
  90. F. Jurca, Claudia Martis, I. Birou, K. Biro: “Analysis of a claw-pole synchronous machine for wind power conversion module”, International conference on Electrical Machines, ICEM 2008, Vilamoura, Portugal 2008, on CD, E-ISBN :  978-1-4244-1736-0, Print ISBN: 978-1-4244-1735-3. ieee, ISI, Scopus
  91. F. Jurca, Claudia Martis, K. Biro: “Claw-pole generator analysis using flux 3D”, SPEEDAM 2008 – International Symposium on Power Electronics, Electrical Drives, Automation and Motion, art. no. 4581153, pp. 1286-1291, 2008, E-ISBN :  978-1-4244-1664-6, Print ISBN: 978-1-4244-1663-9. ieee, ISI, Scopus 3_Google
  92. C. Oprea, Claudia Martis: “Fault tolerant permanent magnet synchronous machine for electric power steering systems”, International Symposium on Power Electronics, Electrical Drives, Automation and Motion SPEEDAM 2008, pp. 256-261, 2008, E-ISBN:  978-1-4244-1664-6, Print ISBN: 978-1-4244-1663-9. ieee, ISI, Scopus
  93. F.Jurca, Claudia Martis, K. Biro: “Magnetic material influence on the performances of a claw-pole synchronous generator for wind systems”, International Conference and Exhibition on Power Electronics Intelligent Motion Power Quality, PCIM 2008, Nuremberg, Germany, on CD.
  94. F.Jurca, Claudia Martis, I. Birou, K. Biro: “Analysis of a claw pole synchronous machine for wind power conversion module”, International Conference OPTIM 2008, Braşov, Romania, E-ISBN :  978-1-4244-1736-0, Print ISBN: 978-1-4244-1735-3, pg. 1-6. ieee, ISI, Scopus, 2_Google, 1_ISI
  95. C. Oprea, Claudia Martis, H. Hedesiu: “Torque ripple minimisation techniques for pmsm in electric power steering systems”, International Scientific Conference, MicroCAD 2008, Miskolc, Hungary, 2008, pp.41- 46.
  96. C. Nicula, Claudia Martis, F. Jurca, H. Hedesiu: “Field harmonics of a squirrel cage induction machine”, International Scientific Conference, MicroCAD 2008, Miskolc, Hungary, 2008, pp.47- 52.
  97. F.Jurca, Claudia Martis, C. Nicula, K. Biro: “Magnetic field analysis in a claw-pole synchronous generator for wind conversion systems”, International Scientific Conference, MicroCAD 2008, Miskolc, Hungary, 2008, pp.53- 58.
  98. Claudia Martis, C. Oprea: “Design and analysis of a permanent magnet synchronous motor for fault tolerant electrical power steering systems”, International Conference and Exhibition on Power Electronics Intelligent Motion Power Quality, PCIM 2008, Nuremberg, Germany, on CD.
  99. Claudia Martis, C. Oprea: “Design and analysis of a permanent magnet synchronous motor for fault tolerant electrical power steering systems”, International Conference and Exhibition on Power Electronics Intelligent Motion Power Quality, PCIM 2008, Nuremberg, Germany, on CD.
  100. C. Nicula, Claudia Martis, K. Biro: “Space and time harmonics in wound rotor induction machine for wind power applications”, CEFC 2008, Athens, Greece, 2008, on the CD.
  101. C. Oprea, Claudia Martis: “Finite element analysis of a brushless dc actuator for fault tolerance electric power steering systems” , ISEF 2007 – XIII International Symposium on Electromagnetic Fields in Mechatronics,  Electrical and Electronic Engineering, Prague, Czech Republic, September 13-15, 2007.
  102. C. Oprea, Claudia Martis, K. Biro: “Six-Phase Brushless DC Motor for Fault Tolerant Electric Power Steering Systems”, ACEMP’07 and ELECTROMOTION’07 Joint meeting, 10-12 September 2007 Bodrum Turkey. ieee,  ISI, Scopus 11_Google, 8_ISI
  103. F. Jurca, Claudia Martis, C. Nicula, K. Biro: “Magnetic field analysis in a claw-pole synchronous generator for wind power conversion systems”, MicroCAD 2007, Miskolc, Ungaria, pp 29-34, 2007.
  104. C. Nicula, Claudia Martis, F. Jurca., Hedesiu, H., Biro K.: “Field harmonics of a squirrel cage induction machine” , MicroCAD 2007, Miskolc, Ungaria, pp 41-46.
  105. F. Jurca, Claudia Martis, E. Trifu., Biro K.: “Permanent magnet claw-pole synchronous generators behavior in wind conversion”. PCIM 2007, Nurenberg.
  106. F. Jurca, I. Birou, Claudia Martis: “Finite element magnetic field analysis of a claw-pole synchronous generator for wind conversion systems”, ISEF 2007 – XIII International Symposium on Electromagnetic Fields in Mechatronics,  Electrical and Electronic Engineering, Prague, Czech Republic, September 13-15, 2007. 4_Google
  107. Claudia Martis, C. Oprea: “Brushless DC and switched reluctance motors for fault tolerant electric power steering systems”, International Congress Automotive, Environment and Farm Machinery, AMMA 2007, Cluj-Napoca, Romania (Acta Technica Napocensis, Series Applied Mathematics and Mechanics, 50, vol. IV, 2007, pp. 119-124).
  108. C. Nicula, Claudia Martis, F. Jurca: “Electrical Machines Virtual Laboratory – the Unbalanced Operation Regime  of the Three-Phase Induction Motor”, Analele Universitatii Oradea, Fascicul Electrotehnica, editia XVIth,  Oradea (Romania), 2007, pp. 86 – 92, ISBN: 1841 – 7213.
  109. Claudia Marţiş, H.C. Hedeşiu, L. Szabó, B. Tătăranu, F. Jurca, C. Oprea: “Electrical Machines Virtual Laboratory: Grid Connection of a Synchronous Generator”, Proceedings of the 12th International Power Electronics and Motion Control Conference (EPE PEMC ‘2006), Portoroz (Slovenia), 2006. ieee, ISI, Scopus 12_Google, 5_ISI
  110. C. Oprea, Claudia Martis, K. Biro, F. Jurca: “Comparative study of two topologies of linear electrical generator suitable for wave energy conversion”, Buletinul Universitatii Petrol-Gaze Ploiesti, Seria Tehnica, vol. LVIII, No. 2bis/2006, pp. 169-175, ISSN 1224-8495.
  111. S. Kia, H. Henao, G. Capolino, Claudia Martis: “Induction Machine Broken Bars Fault Detection Using Stray Flux after Supply Disconnection”, Volumul Conferintei Internationale IECON 2006, Paris (Franta), pe CD,  PF-002534, ISBN: 1-4244-0136-4, 2006. ieee, ISI, Scopus, 11_Google, 5_ISI
  112. I.A. Viorel, A. Banyai, Claudia Martis, B. Tataranu, I. Vintiloiu: “On the segmented rotor reluctance synchronous motor saliency ratio calculation”, 8th International Conference ELEKTRO 2006, Zilina, Slovacia, mai 2006.
  113. F. Jurca, Claudia Martis, C. Oprea, K. Biro: “Claw-Poles Machines in the Power Systems based on Renewable Resources”, International PCIM Europe 2006, Nurnberg, Germania, pe CD, mai 2006. 5_Google
  114. Claudia Martis, B. Tataranu: “Analytical description of the synchronous machine frequency response for diagnosis purposes”, International PCIM Europe 2006,, Nurnberg, Germania, pe CD, mai 2006. 5_Google
  115. Claudia Martis, F. Jurca, H. Hedesiu, K. Biro: “Analytical description of the wound rotor induction generator frequency response for diagnosis purposes”, MicroCAD 2006, Miskolc, Ungaria, pp. 47-53, 2006.
  116. Claudia Martis, F. Jurca, C. Oprea, C. Nicula, K. Biro: “Harmonics analysis in renewable energy sources based on induction and synchronous generators”, MicroCAD 2006, Miskolc, Ungaria, pp 41-47, 2006.
  117. B. Tataranu, I.A. Viorel, Claudia Martis: “On a Variable Reluctance Synchronous Motor Circuit-Field Mathematical Model”, PCIM Europe 2006, 30 May – 1 June 2006, Nuremberg, ISBN 3-928643-43-6.
  118. H.Hedesiu, Claudia Martis, S. Folea: “Remote Condition Monitoring and Diagnostics Technologies in Electromechanical Systems”, PCIM Europe 2006, 30 May – 1 June 2006, Nuremberg, ISBN 3-928643-43-6.
  119. B. Tataranu, I.A. Viorel, Claudia Martis: “On the Variable Reluctance Synchronous Motor Air Gap Feld Harmonics”, Analele Universităţii din Oradea, Secţiunea Electrotehnică, ISSN: 1223-2106, pp. 176-179, 2005.
  120. C. Oprea, F. Jurca, B. Tataranu, Claudia Martis, H. Hedeşiu: “Parameter estimation of a transformer in an electrical machines virtual laboratory using LabVIEW”, Analele Universităţii din Oradea, Secţiunea Electrotehnică, ISSN: 1223-2106, pp.158-161, 2005.
  121. Claudia Martis, I.A. Viorel: “Modeling and analysis of a micro-integrated electromagnetic pump”, Buletinul Institutului Politehnic Iaşi, ISSN 1223-8139, pg. 73-79, 2005.
  122. H.Henao, Claudia Martis , G.A. Gapolino: “Analytical approach of the frequency response for the wound rotor induction machine for diagnosis purpose”, SDEMPED 2005, ISBN 0-7803-9123-X,  pe CD, SD-5060, 2005. ieee, Scopus 3_Google, 1_ISI
  123. Claudia Martis, H. Hedesiu: “Conducted interferences in electrical drives with PWM-inverter fed doubly-salient permanent-magnet machines”, National Conference of Electrical Drives CNAE 2004, Romania, pp. 92-97, 2004.
  124. Claudia Martis: “Analytical description of the stator and rotor defaults influence on the squirrel cage induction machine frequency response”, Acta Electrotehnica, Vol. 45, No. 4, ISSN 1224-2497, pp. 491-499, 2004.
  125. Claudia Martis, H. Hedesiu, B. Tataranu, C. Oprea, F. Jurca: “Electrical Machines Virtual Laboratory – Using LabView for Parameter Estimation of a Transformer“, 5-th EUROPEAN CONFERENCE E-COMM-LINE 2004, Bucharest, on the CD, 59-C5-63-2004. ISBN 973-0-03671-3, October 21-22, 2004.
  126. Claudia Marţiş, H. Hedeşiu, B. Tataranu: “High-frequency model and conductive interferences of a small doubly salient permanent magnet machine”, Proceedings of  IEEE ICIT 2004, Vol. 3, pp. 1378-1383, 2004. ieee,  ISI, Scopus 2_Google, 1_ISI
  127. Claudia Martis, B. Dobai, H. Henao, K. Biro: “Electromagnetic torque as a tool for diagnosis and condition monitoring purposes in induction machine electrical drives”, International PCIM Europe 2004, Nurnberg, Germania, on CD, PP4, may 2004.
  128. H. Henao, Claudia Martis, G.A. Capolino: “An equivalent internal circuit of the induction machine for advanced spectral analysis”, IEEE Transactions on Industry Applications, vol. 40, no. 3, pp. 726-734, may-june 2004. ieee, ISI, Scopus, 50_Google, 36_Scopus, 26_ISI
  129. H. Henao, Claudia Martis ,  G.A. Capolino: “On the stray flux analysis for the detection of  the three-phase induction machine faults”, Procedings of the 38th Annual IAS Meeting, October 2003, Salt Lake City, Utah USA, pp., 2003. ieee, ISI, Scopus, 36_Google, 22_Scopus, 12_ISI
  130. Claudia Martis: “Analytical description of the healthy induction machine frequency response for diagnosis purposes”, Acta Electrotehnica, Vol. 44, No. 1, ISSN 1224-2497, pp. , 2003.
  131. Claudia Martis, B. Dobai, K. Biro: “ Analytical approach of the rotor broken bars effects on the induction machine behaviour”, ICIT’03 International Conference on Industrial Technology,  ICIT’03  Maribor, on CD, RP3_06,  ISSN 0-7803-7853-9, Slovenia December, 2003. ieee, ISI, Scopus 3_Google, 1_ISI
  132. Claudia Martis, H. Henao, G.Capolino: “Interturn shortcircuits in induction machine and their influence on the electromagnetic torque”, Proceedings of the 7th International Symposium on Advanced Electromechanical Motion System “Electromotion’03”, Marrakesh, Morocco, Nov. 2003.
  133. Claudia Martis, Humberto Henao, Gerard A. Capolino, Mircea M. Radulescu: “ Harmonic characteristics of an induction machine connected to a distribution network”- , The 28th Annual Conference of the IEEE Industrial Electronics Society Sevilla, Spain, CD-ROM, Paper SF – 006950, Nov.2002. ieee, ISI, Scopus 6_Google, 5_ISI
  134. M.M. Radulescu, Claudia Martis, I. Husain: “Design and performance of a small doubly-salient rotor permanent-magnet motor”, ELECTRIC POWER COMPONENTS AND SYSTEMS, Vol. 30, No. 8, pp. 823-832, 2002. Taylor_Francis, ISI, Scopus, 4_Google, 2_ISI
  135. H. Henao, Claudia Martis, G.-A. Capolino: “An equivalent internal circuit of the induction machine for advanced spectral analysis”, 37th Annual IAS Meeting, Pittsburgh, USA, pp. 739-745, October 2002. ieee, ISI, Scopus
  136. M.M. Rădulescu, Claudia Martis, I. Husain: “Performance analysis of a small electronically-commutated doubly-salient permanent-magnet motor”, Proceedings of  the 37th International Intelligent Motion Conference, Nurnberg, Germany,  pp. 379-386, 2000. 1_Google
  137. M.M. Rădulescu, Claudia Martis, I. Husain: “Design and analysis of a small doubly-salient permanent-magnet motor”, Proceedings os the 7th International Conference on Optimization of Electrical and Electronic Equipment “Optim 2000”, Brasov, România, vol. 2, pp.407-412, 2000.
  138. Claudia Martis, M.M. Rădulescu, Z. Biro, K. Biro: “ Performance analysis and DSP-based control of a small electronically-commutated doubly-salient permanent-magnet small motor”, Proceedings of the International Conference on Electrical Machines “ICEM 2000”, Helsinki, Finlanda, pp.1370-1374, 2000. 1_Google
  139. Claudia Martis, M. M. Radulescu, K. Biro, M. Hilma: “Switching pattern and dynamic modelling of a variable-reluctance permanent-magnet small motor”, Analele Universităţii Oradea, 1999.
  140. Claudia Martis, J. Gyselinck, M.M. Radulescu, K. Biro: “Static and dynamic performances of a variable-reluctance permanent-magnet small motor”, Buletinul Institutului Politehnic Iasi, Tomul XL V, Fasc. 5, pp. 196-201, 1999.
  141. Claudia Martis, J. Gyselinck, J. Melkebeek, M.M. Radulescu: “Torque analysis of a variable-reluctance permanent-magnet small motor”, Proceedings of the 6th International Conference on Modelling and Simulation of Electric Machines, Converters and Systems Electrimacs 1999, Lisabona, Portugalia, pp. 175-180, 1999.
  142. Claudia Martis, M.M. Radulescu, K. Biro: “Dynamic analysis of a switched variable-reluctance permanent-magnet small motor”, Proceedings of the 3rd International Symposium on Advanced Electromechanical Motion System  “Electromotion’99”, Patras, Grecia, pp.523-528, 1999.
  143. Claudia Martis, M.M. Radulescu, K. Biro: “On the dynamic model of a doubly-salient permanent-magnet motor”, Melecon’98, Tel-Aviv, Israel, vol. 1, pp. 410-414, 1998. ieee, ISI, Scopus, 11_Google, 6_Scopus, 2_ISI
  144. Claudia Martis, M.M. Radulescu, K. Biro: “Field analysis and dynamic model os a doubly-salient permanent-magnet motor”, Proceedings of ICEM 1998, Istanbul, Turcia, vol.1 pp. 110-113, 1998.
  145. M.M. Radulescu, Claudia Martis, K. Biro: “Comparative analysis of doubly-salient reluctance and permanent magnet actuators”, EPE’97, Trodheim, Norvegia. vol 3, pp. 2888-2891, 1997.
  146. M.M. Radulescu, Claudia Martis, K. Biro: “Performanţe statice ale unui micromotor cu magneţi permanenţi şi reluctanţă variabilă”, Conferinţa de Maşini electrice speciale MES’96, Bucureşti, vol 2, pp. 285-290, 1996.
  147. M.M. Radulescu, Claudia Martis, K. Biro: “A new electronically-commutated doubly-salient permanent-magnet small motor”, Proceedings of the 7-th International Conference on Electrical Machines and Drives, Durham, U.K., pp. 213-216, 1995. ieee, Scopus, 11_Google, 4_ISI
  148. M.M. Radulescu, Claudia Martis: “Micromotor magnetoelectric şi reluctant cu comutaţie electronică”, Sesiunea de Comunicări Jubiliară cu ocazia aniversării a 45 de ani de existenţă a SC ICPE SA Bucureşti, SM/pp.51-54, 1995.
  149. M.M. Radulescu, Claudia Martis: “Study of switched reluctance permanent magnet small motors”, Analele Universităţii Oradea, pp. 68-75, 1994.